Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.
Leading 10 usual forklift crashes ， forklift procedure need to take notice of these issues ！.
Blog Article
Do not undervalue the forklift at the workplace. If the procedure is not good, there will be serious mishaps in minutes, and there are numerous mishaps including forklifts.
Situation 1: The forklift freight obstructed the vehicle driver's view, and the individual ahead might not be discovered, resulting in a moving crash.
Instance 2: In order to keep the equilibrium of the forklift when raising heavy products, the workers used their body weight as the counterweight, which almost caused casualties.
Instance 3: The size of the forklift freight surpasses the permitted width of the route and holds on the roadside rack, which nearly triggers an accident.
Case 4: Forklift is speeding up and surrender during a turn.
Case 5: The forklift driver did not see the pedestrian, and the pedestrian did not see the forklift.
Situation 6: The forklift lifts the employees unlawfully, the forklift chauffeur does not wear the safety belt, the forklift lifter drops and the chauffeur is crushed when the forklift surrender.
Situation 7: The forklift driver did not put on a seat belt and fell from the lorry when it rolled over and was crushed.
Forklift procedure need to pay attention to these issues ：.
Start.
1. Prior to starting, observe the surroundings, and after validating that there are no obstacles that prevent the security of driving, honk the horn initially and then begin.
2. For cars with hydraulic ( atmospheric pressure) brakes, the brake hydraulic stress ( atmospheric pressure) gauge must be secure before beginning.
3. When the forklift starts with a lots, the chauffeur needs to first validate that the load is secure and reputable.
4. The beginning should be slow-moving and stable.
Driving.
1. When driving, the elevation between the bottom end of the fork and the ground must be maintained 300mm-400mm, and the mast needs to be tilted backwards. .
2. Do not raise the fork too high when driving. When going into and leaving the work site or while driving, beware that there will certainly be no obstacles overhead. When the lots is traveling, the fork should not be elevated too high, which will affect the stability of the forklift. .
3. After unloading, the fork should be lowered to the regular driving placement before driving. .
4. When transforming, if there are pedestrians or lorries close by, the driving signal must be released first. High-speed sharp turns are forbidden. High-speed doglegs will create the car to lose lateral security and tip over. .
5. When the forklift is downhill, it is purely forbidden to shut off the flame and slide, and it is forbidden to brake suddenly while driving with loads unless there are special circumstances.
6. When the forklift is running, it should obey the web traffic rules in the factory and should keep a certain safety and security distance from the vehicle in front. .
7. When the forklift is running, the lots must be in the lowest position that does not hinder the driving, and the gantry needs to be effectively slanted back. The lots will not be elevated other than when stacking or filling. .
8. The height of the lots need to not obstruct the chauffeur's sight. In special situations, when the thing affects the forward vision, drive at a reduced rate when turning around.
9. It is restricted to turn on the ramp, nor to drive across the ramp. .
10. The safe driving rate of the forklift in the manufacturing facility location is 5 km/h, and it has to drive safely at a reduced rate when entering the production Electric Forklift Truck for Warehouse workshop location. .
11. When the forklift is lifted, lifted or driven, it is prohibited for workers to stand on the fork to hold items and play a stabilizing function. .
12. If issues are found, they will be repaired and reported in a prompt fashion, and they will certainly never run with health problems or hide them.
packing and unloading.
1. When fork-loading items, the range between the two forks ought to be readjusted as required to make the load of both forks well balanced and not manipulated, and one side of the product ought to protest the shelf. .
2. It is restricted to collaborate with a single fork or use a fork top or draw. In special circumstances, safety and security warning signs have to be set up to advise bordering pedestrians. .
3. Electric Forklift Truck for Warehouse In the process of packing and unloading things, the forklift has to be stopped with the brake. .
4. The rate of the vehicle need to be slow and consistent. Be careful not to roll the wheels on the dunnage, so as not to stretch the rolled things and harm individuals. .
5. When making use of a fork to fork the goods, the fork needs to be as deep as possible under the tons, and it must be noted that the fork suggestion should not touch other items or objects. The tons should be supported with marginal back tilt of the gantry so that the load does not slide backwards. The mast can be slanted onward a little when the tons is reduced to allow for simple positioning of the tons and extraction of the forks. .
6. It is restricted to fork goods at high speed and hit tough objects with the fork head. .
7. When the forklift is working, it is prohibited for people to loaf the fork, so as to stay clear of the collapse of the goods and harm individuals. .
8. Straining is restricted, and it is banned to utilize forks to raise workers to participate in high-altitude procedures to stay clear of high-altitude dropping accidents. .
9. It is not allowed to utilize the brake inertia to slip, put, round or roll items. .
10. It is not permitted to make use of forks to select, transform pallet unload.
Leaving .
1. It is restricted to leave the forklift when the products on the fork impend. Before leaving the forklift, you should dump the goods or reduced the fork frame.
2. Pull the emergency brake handle to dead or depress the hand brake switch.
3. The engine is turned off and the power is removed. (Except for special scenarios, such as the motorist does not leave the lorry's line of vision and does not exceed 1 minute).
4. Remove the key. .
Forklift Operation Precautions.
1. Before and after the forklift procedure, the appearance should be checked, and gas, lubricating oil and cooling water ought to be added.
2. Inspect the security efficiency of beginning, running and stopping.
3. Examine whether the lights and horn signals are full and efficient.
4. During the operation of the forklift, examine whether the stress and temperature are normal.
5. After the forklift is running, the exterior leakage should likewise be checked and the seals ought to be replaced in time.
Forklift Safety Operation Specifications.
1. You have to inspect before leaving the auto;.
2. When you experience somebody before you throughout driving, you ought to send out a signal at a distance of 5 m;.
3. The driving rate in the factory does not go beyond 5 km/h;.
4. When driving, the nadir of the cargo need to be 0.3 m ~ 0.4 m above the ground;.
5. The turning must not be as well sharp to stop the propensity of " totally free switching";.
6. Running up and down the incline must be slow and consistent, and no activating the slope is allowed.
7. Do not drive throughout the gradient. When the slope is greater than 10%, the lorry ought to be driven in reverse when declining;.
8. When the forklift employees bring the goods and move on, if they experience huge or heavy items and go to the motorist's line of sight, they must take the reversing exercise
.
The "Eight Prohibitions" need to be complied with in the procedure.
1. Single fork operation is not permitted.
2. It is not allowed to lift the goods for cross country driving.
3. It is not allowed to get the goods by passing on the pallet with the fork.
4. It is not allowed to straight shovel chemicals, flammables and various other hazardous chemicals with forks.
5. It is not enabled to make use of inertia force to get the goods.
6. It is not permitted to use braking force to expatriation round or easy-to-roll things.
7. It is not allowed to bring people to service the pallet or fork, and it is purely forbidden to stand under the fork after the fork is increased.
8. Do not drive side to side on inclines
.
Vehicle parking is not allowed under the list below problems.
1. Contours, narrow roads, railway crossings;.
2. Sections with a longitudinal incline more than 5%.
3. When there is an obstacle on one side of the road, the opposite side of the section with the exact same length as the challenge need to be within 20 meters at each end.
Web：https://www.onenforklifts.com/
Email：[email protected]
Phone：+86 13827083844